Description
HyperX HX426C16FB/16 is a 2G x 64-bit (16GB) DDR4-2666 CL16 SDRAM (Synchronous DRAM) 2Rx8, memory module, based on sixteen 1G x 8-bit FBGA components per module. Each module supports Intel® Extreme Memory Profiles (Intel® XMP) 2.0. Each module has been tested to run at DDR4-2666 at a low latency timing of 16-18-18 at 1.2V.
- Power Supply: VDD = 1.2V Typical
- VDDQ = 1.2V Typical
- VPP – 2.5V Typical
- VDDSPD = 2.2V to 3.6V
- Nominal and dynamic on-die termination (ODT) for data, strobe, and mask signals
- Low-power auto self refresh (LPASR)
- Data bus inversion (DBI) for data bus
- On-die VREFDQ generation and calibration
- Dual-rank
- On-board I2 serial presence-detect (SPD) EEPROM
- 16 internal banks; 4 groups of 4 banks each
- Fixed burst chop (BC) of 4 and burst length (BL) of 8 via the mode register set (MRS)
- Selectable BC4 or BL8 on-the-fly (OTF)
- Fly-by topology
- Terminated control command and address bus
- Height 1.340” (34.04mm), w/o heatsink
Description
Specification
- Series: Kingston HyperX Fury
- DDR Type: DDR4
- Size: 16GB
- Speed: 2666 MHz
- Compliance: PC4-21330
- Pins: 288-pin
- CAS Latency: CL16
- Data Integrity Check: Non-ECC
- Low Voltage: No
- Voltage: 1.2V Typical
- Timings: 16-18-18
- Heatsink: Yes
- Additional Information: See Overview
- Package Type: Blister Pack
- Package Weight: 0.0225 kg
- Warranty: Lifetime
