HyperX Fury Black 32GB Kit (4 x 8GB), DDR4, 2400MHz (PC4-19200), CL15, 1.2V, DIMM Memory

£378.92

Compare

Description

 
32GB (8GB 1G x 64-Bit x 4 pcs.) DDR4-2400 CL15 288-Pin DIMM
 
HyperX HX424C15FBK4/32 is a kit of four 1G x 64-bit (8GB) DDR4-2400 CL15 SDRAM (Synchronous DRAM) 2Rx8, memory module, based on sixteen 512M x 8-bit FBGA components per module. Each module kit supports Intel® Extreme Memory Profiles (Intel® XMP) 2.0. Total kit capacity is 32GB. Each module has been tested to run at DDR4-2400 at a low latency timing of 15-15-15 at 1.2V.
 
 
 
 
Features
  • Power Supply: VDD = 1.2V Typical
  • VDDQ = 1.2V Typical
  • VPP – 2.5V Typical
  • VDDSPD = 2.2V to 3.6V
  • Nominal and dynamic on-die termination (ODT) for data, strobe, and mask signals
  • Low-power auto self refresh (LPASR)
  • Data bus inversion (DBI) for data bus
  • On-die VREFDQ generation and calibration
  • Dual-rank
  • On-board I2 serial presence-detect (SPD) EEPROM
  • 16 internal banks; 4 groups of 4 banks each
  • Fixed burst chop (BC) of 4 and burst length (BL) of 8 via the mode register set (MRS)
  • Selectable BC4 or BL8 on-the-fly (OTF)
  • Fly-by topology
  • Terminated control command and address bus
  • Height 1.340” (34.04mm), w/o heatsink

Description

Specification

  • Series: Kingston HyperX Fury
  • DDR Type: DDR4
  • Size: 4 x 8GB
  • Speed: 2400 MHz
  • Compliance: PC4-19200
  • Pins: 288-pin
  • CAS Latency: CL15
  • Data Integrity Check: Non-ECC
  • Low Voltage: No
  • Voltage: 1.2V
  • Timings: 15-15-15
  • Heatsink: Yes
  • Additional Information: See Overview
  • Package Type: Blister Pack
  • Package Weight: 0.0225 kg
  • Warranty: Lifetime