Description
KVR16N11S6/2
2GB 1Rx16 256M x 64-Bit PC3-12800 CL11 240-Pin DIMM
• JEDEC standard 1.5V (1.425V ~1.575V) Power Supply
• VDDQ = 1.5V (1.425V ~ 1.575V)
• 800MHz fCK for 1600Mb/sec/pin
• 8 independent internal bank
• Programmable CAS Latency: 11, 10, 9, 8, 7, 6
• Programmable Additive Latency: 0, CL – 2, or CL – 1 clock
• 8-bit pre-fetch
• Burst Length: 8 (Interleave without any limit, sequential with
starting address “000” only), 4 with tCCD = 4 which does not
allow seamless read or write [either on the fly using A12 or
MRS]
• Bi-directional Differential Data Strobe
• Internal(self) calibration : Internal self calibration through ZQ
pin (RZQ : 240 ohm ± 1%)
• On Die Termination using ODT pin
• Average Refresh Period 7.8us at lower than TCASE 85°C,
3.9us at 85°C < TCASE < 95°C
• Asynchronous Reset
• PCB : Height 1.180” (30.00mm), single sided component
Description
Specification
- Series: Kingston ValueRAM
- DDR Type: DDR3
- Size: 2GB
- Speed: 1600 MHz
- Compliance: PC3-12800
- Pins: 240-pin
- CAS Latency: CL11
- Data Integrity Check: Non-ECC
- Voltage: 1.5V
- Heatsink: No
- Package Type: Blister Pack
- Package Weight: 0.0205 kg
- Warranty: LIfetime
